18
2x
3 sec
2x
3 sec
(1 sec)
Slope function > 2.5°
Steeper slopes can be set using the angle plate, which is available as an opti-
onal extra (product ref. 080.75). To this end you need to use a crank tripod,
such as the 300 cm professional crank tripod, product ref. 080.34. Refer to
the illustrations below.
TIP 1: set the angle plate to the zero position and allow the device to align
itself automatically. Next, deactivate the automatic sensor by pressing the H
slope button (and holding for 3 seconds). Finally, incline the device to the
angle you require.
TIP 2: Switch the required laser lines on before you activate the slope
function.
Adjust vertical slope, to a max. of 2.5° (Z axis)
One-second rate blinking:
Z axis adjustment up to a max. of 2.5°
Very rapid blinking:
Z axis adjustment up to a max. of 2.5°
GB
