12
High-precision cross-line laser with 8 super-bright laser lines,
plumb laser and additional slope function.
– Homogeneous 360° laser line: The 4 horizontal laser diodes project a homo-
geneous laser line. This enables the device to be used like a rotary laser.
– Additional slope function to align angled surfaces – motorised inclination of
± 2,5° possible.
– A simple, precise plumb function is afforded by the additional plumb laser
at the bottom and the laser cross at the top.
– Out-Off-Level: is indicated by optical signals when the unit is outside its self-
levelling range.
– The pivoted housing can be turned with a vernier adjustment mechanism
and a horizontal circle to permit exact positioning of laser lines.
– Self-levelling range 2,5°, precision 1 mm / 10 m.
General safety instructions
Caution:
Do not look directly into the beam. Lasers must be kept out of
reach of children. Never intentionally aim the device at people. This is a quali-
ty laser measuring device and is 100% factory adjusted within the stated tole-
rance. For reasons of product liability, we must also draw your attention to
the following: Regularly check the calibration before use, after transport and
after extended periods of storage. We also wish to point out that absolute
calibration is only possible in a specialist workshop. Calibration by yourself is
only approximate and the accuracy of the calibration will depend on the care
with which you proceed.
Laser radiation!
Do not stare into the beam
or observe it directly with
optical instruments.
Class 2M laser
< 5 mW · 635-650 nm
EN 60825-1:2007-10
This is a precision instrument which must be handled with care. Avoid
impacts and jarring. Store and transport the instrument in its case!
Turn off the unit when it is not in use! Clean with a soft cloth and
glass cleaner.
!
GB
