LaserLiner 082.042A, Manual

Page: 7 / 92

ThermoSpot Plus
b
d
e
c
a f
g
i
h
Laserstrahlung!
Nicht in den Strahl blicken.
Laser Klasse 2
< 1 mW · 650 nm
EN 60825-1:2007-10
Rev.1114
ThermoSpot Plus
4
Laserstrahlung!
Nicht in den Strahl blicken.
Laser Klasse 2
< 1 mW · 650 nm
EN 60825-1:2007-10
Rev.1114
ThermoSpot Plus
Laserstrahlung!
Nicht in den Strahl blicken.
Laser Klasse 2
< 1 mW · 650 nm
EN 60825-1:2007-10
Rev.1114
ThermoSpot Plus
5
Laserstrahlung!
Nicht in den Strahl blicken.
Laser Klasse 2
< 1 mW · 650 nm
EN 60825-1:2007-10
Rev.1114
ThermoSpot Plus
Laserstrahlung!
Nicht in den Strahl blicken.
Laser Klasse 2
< 1 mW · 650 nm
EN 60825-1:2007-10
Rev.1114
ThermoSpot Plus
1x
For continuous measurement
activate the laser (see figure)
and keep the button pressed.
Continuous measurement / Hold
MAX display
Laser warning message
Laser circle
The laser circle is a targeting aid to sight the location for the infrared
measurement. Temperature measurement is only performed on the
surface within the laser circle. Please ensure that the space between
the instrument and surface to be measured is free of disturbances
(steam, gas, contamination, glass).
Laser output
Release the button as
soon as the laser circle
pinpoints the measure-
ment location. The
measured value is held.
Laser beam switched on
Battery charge
Hold function
Measured value display
Max. value during the
measurement / Emission
coefficient
Display lighting
Unit of measurement °C
Set emission coefficient
ON / Measure a
b
c
d
e
f
g
h
i
The MAX display determines the maximum measured
value within the context of a continuous measurement
(keep trigger button pressed). As soon as you release the
trigger button and press it again to start a new measure-
ment, the MAX value will be reset and the instrument will
start the process of recording the maximum measured
value all over again.
07 GB