EXAMPLE:
the code to be inserted is 5 6 0 5 4. First digit 5 - Wait 5 flashes for the first digit. After
the fifth flash has been completed and the LED has turned OFF, immediately turn ON the ignition
key for 1 second. Turn the ignition OFF and after a pause, the LED will flash for the next digit of the
Pin Code; Second digit 6 - Wait 6 flashes for the second digit. After the sixth flash has been com-
pleted and the LED has turned OFF, immediately turn ON the ignition key for 1 second. Turn the
ignition OFF and after a pause, the LED will flash for the next digit of the Pin Code; Third digits 0 -
For the 0 digit, the flashes to be completed on the LED are 10. Continue until all the digits have
been displayed and inputted correctly. If the code inserted is correct, the alarm will automatically
DISARM without any audible tones and visual signals. If the code is incorrect, an alarm condition
will occur.
ARMING THE ALARM SYSTEM
The alarm system can also be armed using the electronic key (See fig. 3). Placing the key on the
LED receptacle (See fig. 4) arms the alarm without activating the power locking system. The
direction indicator lights will flash twice and the alarm may give two audible tones, (programmable
function) generated at the same time to indicate that the system has been armed. Then the LED
(see fig. 4) in the passenger compartment will remain on for 30 seconds (pre-alarm time) and
ALARM ARMING/DISARMING USING THE ELECTRONIC KEY (Optional on 290i2/212)
fig. 3
fig. 4
ISUT291-213UK.p65
11/05/2006, 18.53
8
