pag. 16
ENGLISH
Œ
Open the door on the driver’s side;
•
Turn the ignition key ON;
Ž
Insert and keep inserted an electronic key into the receptacle socket;
•
Now turn off the ignition key;
•
Remove the electronic key from the receptacle socket. The red LED in the receptacle will flash
10 times and remain on, indicating the self-learning is activated;
‘
At this point, insert the electronic keys into the receptacle socket, that you want to store into
the alarms memory. The red LED will turn off briefly for each electronic key that has been
programmed into the alarm memory;
’
To complete the self-learning procedure either; turn the ignition ON to exit the function or
wait 10 seconds for the LED to go out and then start to flash the emergency pin code (see
section
“ How to Know Your Emergency Pin Code”
).
Ø
You should allow no more than 10 seconds between key insertions.
Ø
You can program a maximum of 4 electronic keys.
Ø
The electronic keys not programmed during the last self-learning session will be automatically
cancelled by the alarm memory.
Ø
If all electronic keys are lost, contact your nearest area dealer.
KEY
* Optional. ** Vehicle dependent. *** Key operated deadlocking may disarm the alarm.
10 - SELF-LEARNING OF A NEW ELECTRONIC KEY
The self-learning function allows you to program new electronic keys or cancel electronic keys.
To carry out the self-learning procedure, an original functioning electric key must be available.
Then do the following:
ISUT270-278UK.p65
12/05/2006, 10.24
16
