pag. 10
ENGLISH
7 - FEATURE EXCLUSIONS
This function allows the alarm to be armed automatically when you switch off the ignition and exit
the vehicle, without using the original remote control. 13 seconds after the last door is closed/or
13 seconds after the courtesy lights go out the alarm will arm. Please ensure you lock the doors
manually!
To
disarm
the alarm if it as been armed by one of the above features:
-
original remote control
– in this case you may need to prompt the vehicle for locking and then
prompt it again for unlocking, in order for the alarm to be re-synchronised again with the vehicle
lock status;
-
emergency electronic key
– enter the vehicle, the alarm generated by a door opening will be
delayed for 5 seconds, to allow the electronic key to be inserted into the receptacle socket.
Ø
When armed through these functions the alarm will not activate the comfort closing*/window
closing*/additional sensor* and the ultrasonic/microwave sensor*.
Ø
Accidental Disarming feature may not be available on vehicles where the original remote lock-
ing puts on the courtesy lights when unlocking.
6.2 - PASSIVE ARMING*
6.3 - ADDITIONAL SIREN*
This function allows the alarm to be connected to an additional siren/vehicle horn/paging system
and can be programmed to obtain a continuous or intermittent output for the entire alarm cycle.
Note:
Some vehicles may have a similar locking feature, where if the vehicle is unlocked and then
not entered, the vehicle locking system re-locks the vehicle. In this case the alarm may fully re-arm
activating comfort closing*/window closing*/additional sensor* and the ultrasonic/microwave sen-
sor*.
The following features may be disabled:
ISUT270-278UK.p65
12/05/2006, 10.24
10
