NAVC-L07
USER MANUAL
4
WHATS IN THE BOX
FEATURES AND OPERATION
Note: A memory card is required for operation
The NAVC-L07 requires a Micro SD card (not included) to record video / image content. (see
page 8 for a table showing SD card capacity and the relevant amount of video / image
content able to be stored). For optimal performance, we recommend using a Class 4 Micro
SD card (the most common type) to ensure fast data transfer rates.
Power on/off function (auto on/off)
To turn on the NAVC-L07, press the power button on the top of the device. To turn off,
press the same power button. When connected to the 12v DC socket (cigarette socket) of
your car, the NAVC-L07 will turn on and off automatically when the car’s ignition is turned
on or off. If the NAVC-L07 does not turn off immediately it means the device is completing
the file save process before turning off (usually only a few seconds).
If the 12v socket is “constant on” (in some European vehicles), then the NAVC-L07 will need
to be turned on/off manually by the power button.
Auto Record when turned on
When the NAVC-L07 is turned on (either by pressing the power button or auto on) the
device will automatically begin recording. To stop recording, press the OK button or
disconnect the power cable.
Installation on the car windscreen
The NAVC-L07 works best when mounted centrally and high up on the windscreen (typically
behind or close to the rear vision mirror). Use the supplied windscreen suction mount to
affix the NAVC-L07 to the windscreen and then adjust the mount until you can see a clear
view of the road ahead on the LCD.
