NAVC-L07
USER MANUAL
9
Connecting the NAVC-L07 in the Car
The above wiring diagram shows a left hand drive vehicle. Wiring path is only a
suggestion.
1.
NAVC-L07 device mounted behind the rear vision mirror.
2.
12v DC cable routed behind rear vision mirror
3.
Cable hidden behind roof headlining
4.
Cable hidden behind “A” pillar – beware of airbag equipped cars
5.
Cable is routed beside the dashboard / near the door hinges
6.
Cable is passed under the passenger carpet (or under the dashboard)
7.
12v DC plug is connected to the car’s 12v “cigarette socket”.
Once the wiring and installation of the NAVC-L07 have been completed, please check the following:
- With the car’s ignition on (or engine started), the red LED indicator on the NAVC-L07 will light up and the LCD
screen should turn on. Recording should start automatically. This will indicate a successful installation –
- When the car’s ignition is turned off, the device should turn off within 20 seconds. If this doesn’t happen then
power is still being supplied to the car’s 12v socket and the device will need to be switched off manually.
