BLU-BD1080
CONNECTING AUDIO
Audio from the BLU-BD1080 can be played through
or 5.1 channel speaker system
GOOD: Connecting RCA Stereo
Requires RCA Stereo Audio cable (include
Standard colours for RCA stereo is WHITE=LEFT channel, RED
1.
Plug the RED and White RCA cables in
to the WHITE and RED RCA STEREO
AUDIO OUTPUT on the player and
plug the other end in to the RCA
Stereo input on the television or the
stereo or Home Theatre system.
2.
Set the connected television
Home Theatre system to the input
source used in step #1.
3.
This will allow audio from the player to
NOTE:
The STEREO AUDIO OUT
stereo signal from multi
settings in the Audio Setup do not affect the STEREO AUDIO OUT.
BETTER: Connecting 5.1 Channel Audio.
Requires a set of 5.1CH Audio Cabl
1.
Plug the 5.1CH audio cables into the
plugs that make up the 5.1 AUDIO
OUT put on the rear of the player.
2.
Connect the other end of the cables to
the 5.1CH AUDIO input on you
Theatre or 5.1 speaker system.
3.
Please be sure to match the output to
the correct input.
Each plug is labelled to indicate the audio channel it carries
FR = Front Right
FL = Front Left
BD1080
USER MANUAL
CONNECTING THE PLAYER
CONNECTING AUDIO
BD1080 can be played through a connected television or through a
speaker system or even a full home theatre surround sound system.
Stereo
Stereo Audio cable (included)
Standard colours for RCA stereo is WHITE=LEFT channel, RED= RIGHT channel.
RCA cables in
to the WHITE and RED RCA STEREO
AUDIO OUTPUT on the player and
plug the other end in to the RCA
the television or the
heatre system.
the connected television, stereo or
to the input
from the player to play on the connected device
.
The STEREO AUDIO OUT terminals will always provide a down
stereo signal from multi-channel sources. The “Down Mix” and other speaker
settings in the Audio Setup do not affect the STEREO AUDIO OUT.
: Connecting 5.1 Channel Audio.
a set of 5.1CH Audio Cables. (not included).
Plug the 5.1CH audio cables into the
plugs that make up the 5.1 AUDIO
OUT put on the rear of the player.
Connect the other end of the cables to
the 5.1CH AUDIO input on your Home
system.
the output to
Each plug is labelled to indicate the audio channel it carries
SL = Surround (Rear) Left
CEN = Centre (Voice)
SR = Surround (Rear) Right
SW = Sub Woofer
USER MANUAL
15
CONNECTING THE PLAYER
connected television or through a 2.1
or even a full home theatre surround sound system.
RIGHT channel.
terminals will always provide a down-mixed
channel sources. The “Down Mix” and other speaker
Each plug is labelled to indicate the audio channel it carries
CEN = Centre (Voice)
Sub Woofer
(Bass)
