Laser Technology UltraLyte User Manual Download Page 27

Page: 27 / 80

ENU

PTIONS

Electronic Copy of LTI’s UltraLyte User’s Manual – 7

Edition June 1998

Menu Options

The following table lists the options available through the Menu/Options button.

Note:

Your UltraLyte instrument

may not have all the options listed.

Option Screen

Indicators

Explanation

Display Intensity

Varies the in-scope display brightness.

Gate - Short

Artificially restricts the minimum range of the instrument.

Gate - Long

G L

Artificially restricts the maximum range of the instrument.

Measurement units

F, M, MPH, KmH, CmS,
D, G

Sets the units to be used to take measurements.

Continuous mode

CONT

Alternate speed measurement mode in which the instrument measures the
average speed of a target over an operator-determined measurement time.

Mute mode

MUTE

Toggles instrument indicator sounds on and off.

Power Time-outs

ALL on

Toggles instrument and display time-outs on and off.

Download Formats

20.20.Cr, UL100, UL200

Toggles the formats in which data will be downloaded from the instrument.

Reference

Frequency

rEF F out

Dedicated feature for instrument service.

For Internal Use Only. Not for Distribution.

Summary of Contents for UltraLyte

















































































Search results

Summary of Contents for UltraLyte

Reviews:

Related manuals for UltraLyte

Brands by name

Popular brands

Laser Technology UltraLyte, User Manual

Search results

Summary of Contents for UltraLyte

Reviews:

Related manuals for UltraLyte

Brands by name

Popular brands