Laser Technology LTI 20/20 TruSpeed User Manual Download Page 8

Page: 8 / 46

Page 6 - Laser Technology, Inc. LTI 20/20 TruSpeed Metric User’s Manual 3rd Edition

Buttons on the Keypad

The TruSpeed has a 7-button keypad located on the rear panel of the instrument.

The buttons provide easy access to the instrument functions. The table below

lists the buttons and the functions of each.

Button

Name

Function

Speed

Mode

Activates the instrument’s speed

measurement mode.
Speed Limit Edit Function: Accepts the

value that appears on the screen.

Weather

Mode

Activates an alternate speed measurement

mode: simplified gating option.

Targets must be at a distance greater than

61 meters.
Speed Limit Edit Function: Adds 1 to the

value of the flashing digit.

Continuous

Mode

Activates an alternate speed measurement

mode: allows you to obtain successive

speed readings on a target vehicle.
Speed Limit Edit Function: (1) Activates the

edit function. The right-most digit will be

flashing. (2) Press to edit the digit to the

left of the flashing digit.

Backlight

Toggles the display backlight ON/OFF.

Test

Mode

Activates the instrument’s Test Mode:

allows you to verify the TruSpeed’s

mechanics.
Speed Limit Edit Function: Subtracts 1 from

the value of the flashing digit.

Brightness

Control

Varies the intensity of the in-scope aiming

reticle.

Power

ON/OFF

Press and release to power ON the

instrument.
Press-and-Hold for approximately 3 seconds

to power OFF the instrument.

Summary of Contents for LTI 20/20 TruSpeed















































Search results

Summary of Contents for LTI 20/20 TruSpeed

Reviews:

Related manuals for LTI 20/20 TruSpeed

Brands by name

Popular brands

Laser Technology LTI 20/20 TruSpeed, User Manual

Search results

Summary of Contents for LTI 20/20 TruSpeed

Reviews:

Related manuals for LTI 20/20 TruSpeed

Brands by name

Popular brands