3
INSTRUCTION MANUAL
Hydraulic Cutter “CK0116” “CK0125”
2. TECHNICAL SPECIFICATIONS
Model: CK 01 16 - CK 01 25
CK0125
CK0116
Push capacity (700 Kg/cm
²
)
350kN 140kN
Stroke
32mm 20mm
Effective area
56,7cm2 19,6cm2
Oil capacity
181,4 cm3
39,2cm3
Weight
15,6kg 4,5kg
PERFORMANCE
BAR
Minimum diameter: 5 mm
CHAIN
3. START UP
1.
Assemble the complete system, and make sure about the perfect fitting of pump, hose, coupler and tool.
2.
Make sure about the knowledge of pump chosen and who it work.
3.
Test the circuit, pumping oil into the tool. Opening the return valve (if it is necessary) to checking the blade return. Check the tool at maximum pressure,
working the piston against the limit of stroke and return the blade. Repeat this operation to get used to the circuit.
4.
Insert the chain link or bar in the gap between blades (max. 30 mm.), actuate the pump until the material is broken. Return the movable blade by releasing
the pump.
4. MAINTENANCE
REPLACEMENT OF BLADES
•
Fixed blade:
Loosen the screw (20), and push the blade with a nail through the head hole. Remove the damaged blade, put a new one and tighten the screw (20).
•
Movable blade:
Dismantle the screws (17), at the both side, and loosening the second screw (17), it is possible to unscrew the body from the head.
Next step, dismantle the piston, and unscrew the bolt (8), to get the blade free.
Put a new one and proceed opposite way to mount back again, controlling the position of the flat side of the piston.
The screws (17) work like the piston guide. Lock the screws leaving a enough gap for a well work of the spring.
REPLACEMENT OF SEALS
After dismantle the piston, unscrew the bolt (6), and pull out the piston from the body. Replace the seal and segment for the new ones. Do not use sharp edged tools.
Use spare parts from LARZEP.
Take this opportunity to change the O-ring (18) and (21) and the guide (14).
To mount back again, proceed opposite way.
5.WARRANTY
LARZEP, S.A.
guarantees its products against all design and manufacturing defects for the durations of two years from the date of purchase. This guarantee does not
include the ordinary wear of both metal and non-metal parts, abuse, using the equipment beyond its rated capacity and any wear or damage incurred as a result of
using a hydraulic fluid which is not recommended by
LARZEP, S.A.
Please note that if the equipment is disassembled or serviced by anyone other than an authorized service dealer or by
LARZEP, S.A
., this guarantee is rendered null
and void.
In the event of a warranty claim, return the equipment, to
LARZEP, S.A
. or the authorized dealer which sold you the hydraulic equipment,
LARZEP, S.A
. will
repair or replace the faulty equipment, whichever is deemed most appropriate.
LARZEP, S.A.
shall not be held liable for any consequential damages or losses,
which may occur as a result of faulty equipment
CK0125 CK0116
Bar diameter mm.
Bar diameter mm.
Strength Kg/cm
²
30 70
25
100
20 13
140
17 11
160
CK0125 CK0116
Chain Diameter max.
mm.
Chain Diameter max.
mm.
Strength Standard
30
19
28-43-50
DIN 766 - DIN 762
20
14
60-80
DIN 766 - DIN 762
Single acting, spring return
Balls half-quick male coupler
Handle.
Interchangeable blade
