1227K34A
4.2.2.5 Parameters nr, r1, r2, r3 (Color option)
To define the color, the combination of the 2 internal bits (r1 and r2) is used.
The following parameters are used to define colors.
4.2.2.5.1 Use of a single color
To use a single color regardless of the value that is displayed, configure the following
parameters:
Parameter
Value
B
20
C
0
D
20
E
0
nr
color
r1
color
r2
color
r3
color
Parameters
C
and
E
can have any value.
The
parameters nr
,
r1
,
r2
, and
r3
must be assigned the same color.
Regardless of the color configured, red is used in the parameter programming.
4.2.2.6 Parameter F
To modify parameters. To exit modifying parameters, click the key ("
"). Before exiting,
the parameters are saved.
If you want to continue modifying parameters, press the "+" key until you reach the
parameter you want to modify.
Color if no internal bit is enabled. To change the color, press the *
key. Pr moves to the next parameter.
Color if
r1
is enabled
. To change the color, press the * key.
Pr moves to the next parameter.
Color if
r2
is enabled
. To change the color, press the * key.
Pr moves to the next parameter.
Color if both
r1
and
r2
are activated
. To change the color, press
the * key. Pr moves to the next parameter.
