4.2.2.4 Parameter 4: Parameters B, C, D, E (Color option)
The color option allows you to automatically modify the color of the digits according to the
current value. The possible colors are: Red, Green, and Yellow.
To be able to manage the color, 2 internal bits (r1 and r2) are used that are activated
depending on the value of the visualizer. To configure the activation levels of these bits,
2 parameters per internal bit are required, Parameters B, C configure the r1 and D bit, E
the R2 bit.
4.2.2.4.1 Parameter 4: Parameters B, C, D, E (Color option)
With the parameter B the form of activation and the delay or hysteresis are configured.
The C parameter sets the trigger level. The heavier digit allows you to set a negative
value.
Parameter B
Left digit
Control bit
Right digit
Activation
0
ON if Value > Parameter C
0
No delay or hysteresis
1
ON if Value < Parameter C
1
Delay 1s
2
Always OFF
2
Delay 2s
3
Delay 4s
4
Delay 6s
5
Delay 10s
6
Hysteresis = 2
7
Hysteresis = 4
8
Hysteresis = 8
9
Hysteresis = 12
4.2.2.4.2 Configuring the internal bit r2
With the D parameter, the form of activation and the delay or hysteresis are configured.
With the E parameter, the trigger level is configured. The heavier digit allows you to set a
negative value.
Parameter D
Left digit
Control bit
Right digit
Activation
0
ON if Value > Parameter E
0
No delay or hysteresis
1
ON if Value < Parameter E
1
Delay 1s
2
Siempre OFF
2
Delay 2s
3
Delay 4s
4
Delay 6s
5
Delay 10s
6
Hysteresis = 2
7
Hysteresis = 4
8
Hysteresis = 8
9
Hysteresis = 12
