![background image](http://html.mh-extra.com/html/larson-electronics/xle-md-tm-ir-r1/xle-md-tm-ir-r1_instruction-manual_677021003.webp)
3
.
General Information
1.
Before and after use, keep the inner part of the sensor and
probe clean.
2.
Please use the thermometer in a stable temperature
environment. When the ambient temperature fluctuates greatly (such
as the temperature difference from indoor to outdoor), please wait for
10 seconds before measuring.
3.
Do not start measuring body temperature immediately after
measuring objects with extremely high or low temperature. Please
leave it for 10 minutes before measuring the body temperature.
4.
When the measured people or object comes from a place
with a large temperature difference from the measurement
environment, they should stay in the measurement environment for at
least 5 minutes.
5.
Try not to measure when there
is makeup
,
perspiration
,
water,
hair
or etc. on the forehead. Don’t measure body temperature
in 30 minutes after exercise, bath
ing,
or
eating.
6.
Press and hold the SET button in power off state, and
enter the setting mode after the 'beep' sound. Press the SET button to
select F4, and use the MEMO button switches between
℃
mode and
℉
mode. After setting, press the POW button to power off.
XLE-MD-TM-IR-R1
Larson Electronics, LLC
P
:
(800) 369-6671 www.larsonelectronics.com
7