![background image](http://html1.mh-extra.com/html/larson-electronics/wcde-6-nl/wcde-6-nl_manual_3720588012.webp)
2. To raise the tower, see Figure 3.5 and follow these
instructions:
1. Adjust the light fixtures to point upward or
downward, and inward or outward.
The lights can be positioned without tools.
To aim the lights, loosen the knob on the
outside end of each fixture, and use the
integrated handles to move the fixture.
Tighten the knob when done.
2. Ensure the trailer whe. ls are blocked or
c
hocked.
3. Level the trailer and extend the outriggers.
4. Connect the trailer ground stud to earth
ground.
5. Take the weather into account: do not raise
or use the tower in high winds or an
electrical storm. The tower can afford 80
km/h wind load.
6. Ensure the area above the tower is clear of
all obstructions.
7. Press the green button (seen in picture to the
right) to raise tower. Stop raising tower
when you see "STOP" on mast
Figure 3.5 Raising the tower
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
1
2
of
33