Larson Electronics LLC www.LarsonElectronics.com [email protected]
9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364
e)
Release the “Remote Control Power Switch” first. Release the “Select Group of Lights” button
next. The red indicator light under the chosen “Select Group of Lights” button will blink.
f)
Press “Remote Control Power Switch” once. The red indicator light under the chosen “Select
Group of Lights” button will become steady.
g)
Press “remote Control Power Switch” again. The light will be off and starts its self-reset
process. The programming is finished.
h)
TEST SETUP: Use the remote control to operate the light with the chosen group. If the pairing
process is unsuccessful, redo Steps A-G.
