1
9
Port
NOTE:
This function is not supported by some models, please see the actual model for details.
1.
Click
Setup
>
Network
>
Port
.
2.
Configure relevant port numbers.
3.
Click
Save
.
NOTE:
If the entered HTTP port number has been occupied, a prompt message will be displayed as
Port conflicts. Please try again.
23, 81, 82, 85, 3260 and 49152 are occupied by default. And other
occupied ports will be detected automatically.
Port Mapping
1.
Click
Setup
>
Network
>
Port
>
Port Mapping
.
2.
Enable
Port Mapping
and select mapping type. If
Manual
is selected, then external ports must
be configured (external IP is obtained automatically by the camera). If the configured port is
occupied, then the
Status
will show Inactive.
3.
Click
Save
.