EPLRL-50-16.4-HR-SWB
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
5
The Larson Electronics EPLRL-50-16.4-HR-SWB is an Explosion Proof Reel for use in Class I, II and III rated combustible
locations. Equipped with 50' of 16/4 SOOW cable, the unit features a swivel base with ball bearings which facilitates
rotation and pivoting. This reel is ideal for petroleum facilities, waste water treatment plants, grain storage and handling
silos, paint booths, underground mines, chemical plants, and much more.
WIRING
Standard pigtail(flying leads) wiring
We strongly encourage a licensed electrician install this product
, in all locations especially in outdoor areas
where weatherproofing may be required. Universal voltage driver permits operation at
600V.
Warning:
Check product label for correct input voltage!
Attach supply line wires to the appropriate light fixture wires as shown
in the diagram
Secure each pair of wires according to the diagram. Utilize a junction box or
similar device and take precautionary steps for weatherproofing all
connections if installed in a location where water may come in contact with the
unit. Ensure the unit is properly grounded and that wiring is done according to
all local and national electrical/building codes.
INSTALLATION
Stretch Applications
The cable is suspended without any intermediate support. Stretch reels generally require a
line pull equal to two times the weight of the cable, which allows approximately 10% sag
at full extension. On long applications where sag cannot be tolerated, it is sometimes desirable
to put supports at intervals of 5 to 10 feet.
Drag
Applications
The reel is mounted on a stationary object and is required to drag the cable over the surface to
the reel. The cable is supported by the ground or some type of cable tray.
Lift
Applications
The cable is lifted vertically in lift applications. The reel is normally designed to handle only the total
weight of the cable. Some lift applications may require a ball stop and ratchet to control the length
of cable to be retracted.
Retrieve
Applications
The reel is mounted on the moving object and winds up or pays out the cable as the machine
approaches or moves away from the fixed end. Retrieve applications can be elevated up to 4 feet
from the cable support surface.