Page 5 of 5
Technical information, advice and recommendations contained in these documents is based on information that
Larson Electronics
believes to be
reliable. All the information and advice contained in these documents is intended for use by persons having been trained and possessing the requisite
skill and know-how and to be used by such persons only at their own discretion and risk. The nature of these instructions is informative only and does
not cover all of the details, variations or combinations in which this equipment may be used, its storage, delivery, installation, check out, safe operation
and maintenance.
There are no warranties, expressed or implied, except that all goods shall conform to their description, subject however to commercial tolerances and
variations.
All sales are made on the express understanding that there are no express warranties other than those contained in a specific agreement between
Seller and Buyer and that there are no implied warranties that the goods shall be merchantable, nor are there any warranties which extend beyond the
description on the face hereof. In the event of the breach of any warranty or alleged breach of any warranty by
Larson Electronics
, the Buyer shall not
be entitled to consequential or incidental damages. The obligation of
Larson Electronics
under its warranty shall be limited to repairing or replacing
FOB
Larson Electronics'
plant or allowing credit at
Larson Electronics'
option, any part or parts which may prove to be thus defective, provided the
Buyer(s) gives
Larson Electronics
prompt notice of the defect or defects. It is expressly agreed and understood that this remedy of repair or
replacement or credit at
Larson Electronics'
option is the exclusive remedy of the Buyer of this product.
Since conditions of use of the product are outside of the care, custody and control of
Larson Electronics
, the purchaser should determine the
suitability of the product for his intended use,
and assumes all risk and liability whatsoever in connection therewith.
MAINTENANCE MANAGER: Please record the following information for your records:
COMPLETE CATALOG NO. ________________________________________________________________
(As shown on nameplate)
INSTALLED BY _________________________________________________________________________
DATE OF INSTALLATION _________________________________________________________________
MAINTENANCE DATA
These devices require no maintenance other than a periodic cleaning and a check for proper operation. Also, check
cord
and fasteners for
damage and/or wear. Inspections should be performed
on a regular basis
(minimum yearly);
determined
by the environment and usage.
WARNING: Disconnect
and
Lock Out
supply circuit before starting maintenance work.
1.) To clean receptacle, it is recommended that a soft, non-metallic bristle brush be used.
2.) Check tightness of all accessible screws.
3.) Inspect the entire assembly (including cord) for damage,
wear
& proper function. If necessary, consult
Larson
Electronics
factory for availability of replacement parts and discontinue use of the equipment until repairs are made.
An Electrical Preventive Maintenance Program, such as the National Fire Protection Association Bulletin NFPA No. 70B, is
recommended.
LarsonElectronics.com • Phone: 1-800-369-6671 • Email: [email protected]
