Page 4 of 5
FIGURE 6
WIRING
(See
Figure 6
)
:
1.)
NOTE:
Use
only
copper wire with this device
(10, 12 or 14 AWG). Recommended wire strip length –
½ inch nominal
.
Loosen all (3) Terminal Contact Screws and insert wire through the Wiring Entrance holes, into proper terminals:
Green
lead (Ground) to terminal with ground mark & Green screw head; White (Neutral) lead to terminal with Silver screw head
(125V. only); Black and/or Red [Line lead(s)] to
terminal(s)
with Brass screw head.
Hand tighten terminal screws
(recommended torque 8 in.-lbs).
TABLE 1
PLUG
APPLETON
KILLARK
LARSON
CROUSE-HINDS
CONNECTOR
CONNECTOR
RATING
PLUG
PLUG
PLUG
RATING
CAT. NO.
CAT. NO.
CAT. NO.
CAT. NO.
125V, 20A, 1 hp
EPCO-20A
125V, 15A, 1 hp
UGP-15231(QW)
(E or N)CP-1523
ENP-5151
LarsonElectronics.com • Phone: 1-800-369-6671 • Email: [email protected]
