![background image](http://html1.mh-extra.com/html/larson-electronics/cl1b-ss-pm-1227/cl1b-ss-pm-1227_instruction-manual_3722679002.webp)
CL1B-SS-PM-1227
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
3
Attach supply line wires to the appropriate light fixture wires as shown
in the diagram
Secure each pair of wires according to the diagram. Utilize a junction box or
similar device and take precautionary steps for weatherproofing all
connections if installed in a location where water may come in contact with the
unit. Ensure the unit is properly grounded and that wiring is done according to
all local and national electrical/building codes.
INSTALLATION
•
Carefully unpack the unit and place it near your mounting location.
•
Mount the beacon in your desired location using the three predrilled holes located on the base. Wire routing should be
taken into consideration when choosing a mounting location. This unit allows indoor or outdoor mounting as long as the
appropriate wire routing is used.
•
We strongly recommend that only a licensed electrician install this product.
Flash Patterns
The CL1B LED Beacon is programmed with 30 different flash patterns listed below.
Synchronous Flash Patterns
FP1: Single Alert 75 PHASE 1 (sim)
FP2: Single Alert 75 PHASE 2 (sim)
FP3: Quad Flash 75 PHASE 1 (sim)
FP4: Quad Flash 75 PHASE 2 (sim)
FP12: Single Flash 150 PHASE 2 (sim)
FP13: Single Flash 75 PHASE 1 (sim)
FP14: Single Flash 75 PHASE 2 (sim)
FP15: Single Alert 75 (alt)
FP5: Double Flash 150 PHASE 1 (sim)
FP16: Quad Alert 75 (alt)
FP6: Double Flash 150 PHASE 2 (sim)
FP17: Double Flash 150 (alt)
FP18: Double Flash 75 (alt)
FP19: Single Flash 375 (alt)
FP20: Single Flash 150 (alt)
FP21: Single Flash 75 (alt)
FP7: Double Flash 75 PHASE 1 (sim)
FP8: Double Flash 75 PHASE 2 (sim)
FP9: Single Flash 375 PHASE 1 (sim)
FP10: Single Flash 375 PHASE 2 (sim)
FP11: Single Flash 150 PHASE 1 (sim)
(alt) Front and rear
(sim): Front and rear LEDS fire simultaneously
LEDS alternate
Non-synchronous Flash Patterns
FP27: Single Flash 150 PHASE 2 (sim)
FP28: Single Flash 75 PHASE 1 (sim)
FP29: Single Flash 75 PHASE 2 (sim)
FP30: Single Alert 75 (alt)
FP22: Single Alert 75 PHASE 1 (sim)
FP23: Single Alert 75 PHASE 2 (sim)
FP24: Quad Flash 75 PHASE 1 (sim)
FP25: Quad Flash 75 PHASE 2 (sim)
FP26: Double Flash 150 PHASE 1 (sim)
(alt) Front and rear
(sim): Front and rear LEDS fire simultaneously
LEDS alternate