Larson Davis HVM200, Manual

Page: 38 / 88

HVM200 Reference Manual Upgrade Firmware and Options 4-5
FIGURE 4-9 Reboot Button
Step 5
A dialogue box will appear. Select
Confirm
.
Step 6
A second alert will appear. Wait 30 seconds.
Step 7
The meter will lose connection to G4 LD Utility.
Step 8
Reestablish connection.
4.4 Upgrade Firmware and Options
To upgrade firmware and install optional firmware, follow these steps:
Step 1
Make sure the meter is powered on.
Step 2
Launch G4 LD Utility and connect the HVM200 meter to
your PC. see “Connecting HVM200 to G4 LD Utility” on
page 2-7
Step 3
If you meter is connected to G4 LD Utility, disconnect by
clicking on the × on the tab of your meter.
FIGURE 4-10 Disconnect Meter
Step 4
From G4, navigate
File
 
Upgrade Firmware or
Options
.
Step 5
Choose meter, then select
Connect.
Step 6
In this dialogue box you can check Firmware or Options,
then press button for
Choose Firmware File
(or
Choose
Options File
if you checked “Options”.
Reboot
Button
To disconnect meter, click this ×