2
TORNADO 2
English
TORNADO2 on frame
A
B
*Available on request with special voltages
PARTS OF THE PUMP IN CONTACT WITH THE MATERIAL Stainless Steel AISI 420B, Teflon; Aluminium
WORKING PRINCIPLE
The
LARIUS TORNADO2
unit is defined “
electric piston pump
”.
An electric piston pump is used for high pressure painting without
air (from this process derives the term ”airless”).
The pump is controlled by an electric motor coupled with a
reduction gear.
A cam shaft and a connecting rod allow to obtain the reciprocating
motion necessary to the working of the “pumping group” piston.
The piston movement produces a “vacuum”.
The product is sucked, pushed towards the pump outlet and then
TORNADO2 on trolley
SUPPLY (single-phase)*
MOTOR POWER
MAX. WORKING PRESSURE
MAX. DELIVERY
MATERIAL OUTLET
WEIGHT
LEVEL OF THE SOUND PRESSURE
LENGTH
WIDTH
TOTAL HEIGHT
HEIGHT WITHOUT HANDLE
220V C.A. 50H
2 kW (S2)
210 bar
2,2 L/min
M16 x 1,5 (M)
21 Kg
≥
80dB(A)
(
A
) 500 mm
(
B
) 300 mm
(
C
) 500 mm
450 mm
sent to the gun through the flexible hose.
A mechanical device on the side of the reduction gear casing,
allows to adjust and control the pressure of the material coming
out of the pump.
When the pump reaches the set value, the motor stops and starts
again when the value decreases.
A safety valve avoiding overpressure, guarantees the total reliability
of the equipment.
TECHNICAL DATA
220V C.A. 50H
2 kW (S2)
210 bar
2,2 L/min
M16 x 1,5 (M)
25 Kg
≥
80dB(A)
(
A
) 650 mm
(
B
) 520 mm
(
C
) 965 mm
C
A
B
