Larius 4, Instruction Manual

Page: 8 / 20

Edit. 002 - 06/2019
www.larius.eu
LARIUS 4
8
C
1
2
3
4
5
6
7
pOs.
1
2
3
4
5
6
7
Description
Pump feed air pressure regulator
Pump feed air manometer
Air closing cock
Pump feed air inlet
Pump fastening and supporting bracket
Material inlet fitting
Material outlet filling
e
MADE IN ITALY
WWW.LARIUS.EU
MODEL
SERIAL NUMBER
YEAR
OF COSTRUCTION
DesCrIptION
OF tHe eQUIpMeNt
The
LarIUs 4
pump is a double diahragm pneuma-
tic pump to be used for transfer of low and medium
viscosity fluids.
It is essentially composed of two chambers which are
placed on suctio and on delivery alternatively thanks to
the action of two membranes in teflon connected to a
shaft in reciprocating traverse motion. The reciprocating
motion is obtained through a proper compressed air
driver reversal device (pilot valve).
traNspOrt aND UNpaCKING
• The packed parts should be handled as indicated in the
symbols and markings on the outside of the packing.
• Before installing the equipment, ensure that the area to
be used is large enough for such purposes, is properly
lit and has a clean, smooth floor surface.
• The user is responsible for the operations of unloading
and handling and should use the maximum care so as
not to damage the individual parts or injure anyone.
To perform the unloading operation, use only qualified
and trained personnel
(truck and crane operators, etc.)
and also suitable hoisting equipment for the weight of
the installation or its parts.
Follow carefully all the safety rules.
The personnel must be equipped with the necessary
safety clothing.
• The manufacturer will not be responsible for the unlo-
ading operations and transport to the workplace of the
machine.
• Check the packing is undamaged on receipt of the equi -
pment. Unpack the machine and verify if there has been
any damage due to transportation.
In case of damage, call immediately
LarIUs
and the
Shipping Agent. All the notices about possible damage
IDeNtIFICatION
D
For communications with LARIUS, always refer to the machine
model contained on the identification plate.