Larius 4, Instruction Manual

Page: 9 / 20

Edit. 002 - 06/2019
www.larius.eu
LARIUS 4
9
F
saFetY rULes
•
THE EMpLOYER SHALL TRAIN ITS EMpLOYEES
ABOUT ALL THOSE RISKS STEMMING FROM ACCI-
DENTS, ABOUT THE USE OF SAFETY DEVICES FOR
THEIR OWN SAFETY AND ABOUT THE GENERAL
RULES FOR ACCIDENT pREVENTION IN COMpLIAN-
CE WITH INTERNATIONAL REGULATIONS AND WITH
THE LAWS OF THE COUNTRY WHERE THE pLANT
IS USED.
• THE BEHAVIOUR OF THE EMpLOYEES SHALL STRICTLY
COMpLY WITH THE ACCIDENT pREVENTION AND ALSO
ENVIRONMENTAL REGULATIONS IN FORCE IN THE COUN-
TRY WHERE THE pLANT IS INSTALLED AND USED.
read carefully and entirely the following
instructions before using the product.
please save these instructions in a safe
place.
the unauthorised tampering/replacement of
one or more parts composing the machine,
the use of accessories, tools, expendable
materials other than those recommended
by the manufacturer can be a danger of accident.
the manufacturer will be relieved from tort and criminal
liability.
•• KEEp YOUR WORK pLACE CLEAN AND TIDY. DISORDER
WHERE YOU ARE WORKING CREATES A pOTENTIAL RISK
OF ACCIDENTS.
• ALWAYS KEEp pROpER BALANCE AVOIDING UNUSUAL
STANCE.
• BEFORE USING THE TOOL, ENSURE THERE ARE NOT
DAMAGED pARTS AND THE MACHINE CAN WORK pRO-
pERLY.
• ALWAYS FOLLOW THE INSTRUCTIONS ABOUT SAFETY
AND THE REGULATIONS IN FORCE.
• KEEp THOSE WHO ARE NOT RESpONSIBLE FOR THE
EQUIpMENT OUT OF THE WORK AREA.
•
NeVer
EXCEED THE MAXIMUM WORKING pRESSURE
INDICATED.
• NeVer pOINT THE SpRAY GUN AT YOURSELVES OR AT
OTHER pEOpLE. THE CONTACT WITH THE CASTING CAN
CAUSE SERIOUS INJURIES.
• IN CASE OF INJURIES CAUSED BY THE GUN CASTING,
SEEK IMMEDIATE MEDICAL ADVICE SpECIFYING THE
TYpE OF THE pRODUCT INJECTED.
NeVer UNDERVALUE
A WOUND CAUSED BY THE INJECTION OF A FLUID.
• ALWAYS DISCONNECT THE SUppLY AND RELEASE THE
pRESSURE IN THE CIRCUIT BEFORE pERFORMING
ANY CHECK OR pART REpLACEMENT OF THE EQUIp-
MENT.
• NEVER MODIFY ANY pART IN THE EQUIpMENT. CHECK
REGULARLY THE COMpONENTS OF THE SYSTEM.
REpLACE THE pARTS DAMAGED OR WORN.
• TIGHTEN AND CHECK ALL THE FITTINGS FOR
CONNECTION BETWEEN pUMp, FLEXIBLE HOSE
AND SpRAY GUN BEFORE USING THE EQUIpMENT.
• ALWAYS USE THE FLEXIBLE HOSE SUppLIED WITH
STANDARD KIT.
• THE USE OF ANY ACCESSORIES OR TOOLING OTHER
THAN THOSE RECOMMENDED IN THIS MANUAL, MAY
CAUSE DAMAGE OR INJURE THE OpERATOR.
• THE FLUID CONTAINED IN THE FLEXIBLE HOSE CAN BE
VERY DANGEROUS. HANDLE THE FLEXIBLE HOSE CARE-
FULLY. DO NOT pULL THE FLEXIBLE HOSE TO MOVE THE
EQUIpMENT. NEVER USE A DAMAGED OR A REpAIRED
FLEXIBLE HOSE.
• NEVER SpRAY OVER FLAMMABLE pRODUCTS OR SOL-
VENTS IN CLOSED pLACES.
• NEVER USE THE TOOLING IN pRESENCE OF pOTENTIALLY
EXpLOSIVE GAS.
always check that the product is compatible
with the materials composing the equipment
(pump, spray gun, flexible hose and accessories) with
which it can come into contact. Never use
paints or solvents containing Halogen Hydrocarbons (as the
Methylene Chloride) . If these products come into contact with
aluminium parts can provoke dangerous chemical reactions
with risk of corrosion and explosion.
avoid approaching too much to the pump pi-
ston rod when the pump is working or under
pressure. a sudden movement of the piston rod
can cause wounds or finger squashing.
the high speed of travel of the product in
the hose can create static electricity through
discharges and sparks. It is suggested to earth
the equipment. the pump is earthed through
the earth cable of the supply.
the gun is earthed through the high pressure
flexible hose.
all the conductors near the work area must be earthed.
or anomalies must arrive timely within 8 days at least
from the date of receipt of the plant through Registered
Letter to the Shipping Agent and to
LarIUs
.
• The disposal of packaging materials is a customer’s
competence and must be performed in accordance with
the regulations in force in the country where the plant is
installed and used.It is nevertheless sound practice to
recycle packaging materials in an environment-friendly
manner as much as possible.