Lapple FIBRO FIBROTOR EM Series, Assembly And Operation Manual

Page: 9 / 72

1 INTRODUCTION
1.1 DEFINITION
FIBROTOR 9 | 72
1 Introduction
1.1
Definition
Rotary table Rotary table:
The rotary table is a partly completed machine in the sense of European Guideline
2006 / 42 / EG, Art. 1g and 2g.
1.2
Intendeduse
The purpose of the rotary table is to be mounted in other machines or in other partly
completed machinery or equipment, or to be assembled with them.
The commissioning is not permitted until the necessary safety has been guaranteed
for the entire installation, into which the rotary table has been mounted, and its
conformity with the laws and guidelines of the country where the rotary table is to be
operated, has been established and confirmed.
Its use is permitted only within the limits defined in the order characteristics.
The intended use includes also

the reading of this manual and observing the safety information.

Observing the relevant documentation.

Observing the maintenance instructions.
The rotary table may only be used as intended. Only methods and procedures
described in this manual may be used.
1.3
Improper use
Any use that does not comply with the intended use of the rotary table is considered
a misuse and is prohibited.
The rotary table may not be subjected to loads above its maximum load limits.
As a matter of principle, the rotary table is not suitable for
•
Operation in mobile or portable systems, on ships or in aircraft
•
Operation in life support systems
•
Operation in residential housing
•
Operation beyond the limits of the specified performance data and operating
parameters
•
Use in explosive atmospheres
•
Use in vacuum spaces
•
Use under operating conditions where highly inflammable or explosive
substances are processed
•
Use under operating conditions with aggressive or solvent-containing
substances (e.g. acids, lyes, hydrocarbons, etc.)