Lapple FIBRO FIBROTOR EM Series, Assembly And Operation Manual

Page: 12 / 72

1 INTRODUCTION
1.5 STRUCTURE
FIBROTOR
12 | 72
1.5.5.1 Basic wiring diagram
________________________________________________________
________________________________________________________
Fig. 3 Wiring diagram end switch

Brown

Output

Black

Load

Blue

BESM12MI-PSC20B-S04G
1.5.6
Adjusting the end switches
The end switches S10 and S12 are factory set during the test run (Standard = table
top direction of rotation clockwise).
This factory setting does not mean that an adjustment of the end switch setting to
the rotary table control system used on site may not be required.
S10 "Table top at standstill"
S12 "Motor off"

In the case of pendulum mode we recommend attaching a position detector.
A dividing process occurs from S12 to S12.
The length of the holding phase is displayed with a position diagram.
In divisions as from T 16 there are several standstills on the circumference of the
operating cam.