Lapple FIBRO FIBROTOR EM Series, Assembly And Operation Manual

Page: 19 / 72

2 SAFETY
2.1 BASIC SAFETY INSTRUCTIONS
FIBROTOR 19 | 72
2 Safety
2.1
BASIC SAFETY INSTRUCTIONS
Most accidents during work with machines are due to disregarding the basic
safety instructions.
Perceiving a possible hazard can prevent an accident before it occurs. If there
are hazards, the safety information on the rotary table and in this document
provides warnings about these hazards. If the warnings are disregarded, this
can lead to physical injuries or death.
FIBRO GmbH cannot foresee all possible circumstances that can lead to
potential hazards. Therefore, the warnings in this document and on the rotary
table do not include all hazards.
Personnel must have the necessary training and experience and possess the
necessary tools in order to be able to perform the work on the machine correctly.
Improper operation, maintenance or repair can be dangerous and cause serious or
fatal injuries.
No work related to transport, assembly, maintenance or repair may be performed if
the information about transport, assembly, maintenance or repair has not been read
and understood.
The rotary table is designed for mounting in other machines or for assembly with
other machines. FIBRO GmbH has no control over the intended use of the machine.
The operator is responsible for the safety devices for operation of the machine.
Operation without safety devices is prohibited.
The operator is responsible for the safe operation and the information that is
necessary for the operation.
The rotary table may not be used in any way that deviates from the instructions in
this manual. All safety rules and safety measures, including the site-related
regulations and safety measures at the workplace, which are applicable to its use,
must be observed.
If work equipment, operation, work methods or work techniques that have not been
explicitly proposed by FIBRO GmbH are used, the operator must himself ensure the
safety for himself and for other persons.
It must also be ensured that the rotary table does not get damaged or become
unstable over the course of the intended operation, maintenance and repair work.
The information, descriptions and figures in this document are based on the
information that was available at the time of creation of this document.
The descriptions, operating pressures, measurement methods, figures and other
items can be changed at any time. These changes can affect the characteristics of
the rotary table. The currently applicable information must be provided prior to
starting the performance of any work.