If you have any questions or need assistance, please call:
LAPORTE® Head Office Phone : +33 493 65 77 77 Fax : +33 493 65 77 78
www.laporte-shooting.com
Trap 185 E PC LIGHT (6 col) “Basic Manual” Page: 5 V. 1
5. THE TARGETS BREAK IMMEDIATELY WHEN FIRING
The targets were damaged prior to loading.
The targets were damaged during loading.
Mixed targets (different diameters in it stack i.e. 107-109-110mm)
The rubber is damaged or worn.
The throwing arm is bent. It can be straightened without removing it. Check that the rubber is always at the same
distance from the throwing plate. Uncock the throwing arm and take out the mainspring before this inspection
and adjustment.
The throwing plate is damaged. Check edges of plate for 'nicks' and file smooth if necessary.
The throwing plate is dirty or has clay target pitch build up resulting in the target not being positioned correct at
cocking time. Clean with solvent or sand it.
The throwing plate is loose.
Check that nothing is in the way of the target trajectory.
6. The motor starts turns but the machine does not cock.
Check the state of the chain.
7. The motor turns but the machine does not rotate.
Check the state of the chain, cable, and the spring.
8. Two clays fall from the magazine
Mixed clays (different diameters in same stack i.e. 107-109-110mm)
Check the distance between the clay and the clay block.
9.
The targets do not come out of the magazine
The targets are stuck together. Separate them before putting them in the magazine.
Mixed targets. (Different diameters in same stack i.e. 107-109-110mm)
Magazine rods are damaged or bent and are restricting the vertical movement of the target stack.
The magazine support base is damaged.
The magazine is twisted.
The adapter knives are not adjusted correctly (see notice)
Check the distance between the clays and the clay block.
PDF created with FinePrint pdfFactory trial version
