et ne peut etre reproduit ou communiqué sans son autorisation
371, chemin des Prés 06140 BIOT
Ce plan est la propriété de la Sté LAPORTE
Tel 04 93 66 77 98 Fax 04 93 66 77 99
A.S.01/03
-MAINTENANCE-FOR-THE-TRAP-85-
DISMANTLE-THE-SPRING-AND-DISCONNNECT-THE-MACHINE-FROM-THE-POWER-SUPPLY
OILING-AND-GREASING-ESSENTIAL-AFTER-ONE-MONTH-THEN-EVERY-SIX-MONTHS
1/To dismantle:1-Unarm the machine with a clay.
2-Completely unscrew the arming spring.
3-Unassemble the magazine support plate from the body.
4-Unassemble the ARMING SPINDLE from, the CRANK PIN SPRING.
5-Take off the KEY from, the arming spindle.
2/Check the spare parts:
1-Check the threaded eye bolt for wearing.
2-Check the rubber for wearing.
3/Lubrication:
1-Grease the ONE-WAY BEARING and the NEEDLE BUSH with the grease
CENTOPLLEX 1 DL (delivered with the machine). WARNING do not use any other type of grease !!!
2-Lubricate the washer on the THREADED EYE BOLT and the thread.(Lithium grease)
3-Lubricate the left and right arms under the MAGAZINE SUPPORT PLATE.(Lithium grease)
4-Lubricate the chains and the cogs. (Marine type grease for gearing parts)
THROWING ARM
1307624
RUBBER
1307620
MAG. SUP. PLATE
ARMING SPINDLE
1307614
1400434
KEY 8x7x16 2BR
1307631
BODY
1307644
CRANK PIN SPRING
THREADED EYE BOLT
1302653
ONE-WAY BEARING
SPECIAL GREASE
NEEDLE BUSH
WARNING:USE-EXCLUSIVELY-CENTOPLEX-1DL-GREASE
IF-ANOTHER-TYPE-OF-GREASE-IS-USED-THE-ONE-WAY-BEARING-COULD
(--DELIVERED-WITH-THE-MACHINE-)
SCREW TFHc M6x20 BLOCKED
-BECOME-DEFECTIVE
COG SUPPORT
1307615
SPECIAL GREASE
PDF created with FinePrint pdfFactory trial version
