NOTE 1:
If a Belt Pack is in shared mode, the Communication Group will be allocated as “3” automatically for the Belt
Pack and the available Communication Group for
the Belt Pack is only one group, “3”.
NOTE 2:
If no action is taken for 10 seconds on any menu, all changes made will be saved automatically and the display will
be off - except
„TWO GROUPS‟ menu.
CHANGE BATTERIES
When Batteries
become weak, a voice message “Change battery” will be heard in the headset. When this happens, open
the battery cover by sliding down, and remove batteries from the Belt Pack. The removable battery sled will hold two 1.5v
alkaline batteries. When you use two alkaline batteries, insert two 1.5v alkaline batteries into the battery sled, and put it in
the battery holder. When replacing a battery, make sure the position of polarity (+, -) is correct. To remove the battery pack
from the Belt Pack, pull up on top of the battery pack and lift the battery pack out of the Belt Pack. And replace it with a fully
charged battery pack.
VOICE MESSAGE IN THE HEADSET OF THE BELT PACT
“Power on”
“Power off”
“Hands free on”
“hands free off”
“Beep”
“Maximum”
“Minimum”
“Audio channel is busy”
“Unlatched”
“Change battery”
“Out of coverage ”
“Group one”, “Group two”, “Group three”
50