LAON TECHNOLOGY LT150 MOBILE User Manual Download Page 8

Page: 8 / 40

ⓒ

2019

LaON

Master Beltpack (MB) mode

⚫

A Beltpack can be set in Master Mode to replace the Mobile Station.

⚫

In the Master Beltpack Mode, the system provides a single communication group channel with five (5)

full-duplex audio channels (1 MB + 4 Beltpacks).

⚫

Automatic handoff is available between the Mobile Station and Master Beltpack if they are located in

independent separate area respectively. All Beltpacks to be connected to the Master Beltpack are
automatically set to Communication group one (1).

Stand-alone operation in each independent RF space

NOTE

: Do not use Mobile Station and Master Beltpack(MB) in a same coverage. Otherwise, the Beltpacks

will be automatically linked to either one with stronger signal which will cause confusion and wrong
operation on the wireless communication.

……..

BP1

BP2

BP3

BP4

BP127

BP128

BP150 Beltpack

……..

BP1

BP2

BP3

BP4

BP127

BP128

BP150 Beltpack

Master Beltpack (MB)

The Beltpack is connected to the Mobile Station of Communication group 1 and allows automatic or manual
roaming between the Mobile Station and Master Beltpack

MS150 Mobile Station (MS)

Summary of Contents for LT150 MOBILE







































Search results

Summary of Contents for LT150 MOBILE

Reviews:

Brands by name

Popular brands

LAON TECHNOLOGY LT150 MOBILE, User Manual

Search results

Summary of Contents for LT150 MOBILE

Reviews:

Brands by name

Popular brands