ⓒ
2019
LaON
Technology Co., Ltd. All rights reserved.
20
Microphone gain menu
Move to Microphone gain menu, press Set button to select and adjust headset microphone gain level with Up
or Down button.
If the auxiliary connection is activated, auxiliary input gain will be adjustable by controlling microphone gain
level.
Microphone Gain Up
Every time you press the volume up button, increased voice level will be heard from the headset while you
are speaking to headset microphone. When the level is reached out to a maximum, a voice message,
‘maximum’ will be heard from the headset.
Microphone Gain Down
Every time you press the volume down button, decreased voice level will be heard from the headset while you
are speaking to headset microphone. When the level is reached out to a minimum, a voice message,
‘minimum’ will be heard from the headset.
Sidetone menu
Move to Sidetone menu, press Set button to select and adjust headset Sidetone volume with Up or Down
button. If the auxiliary connection is activated, the side tone will be heard on auxiliary output and there will be
feedback from auxiliary input to output as well. If it is not required, set the side tone volume as
‘0’ value. In
this case, you will not hear auxiliary input from the headset of the Mobiles Station.
Sidetone Up
Every time you press the volume up button, a beep sound will be heard from the headset. When the level is
reached out to a maximum, a voice prompt, ‘maximum’ will be heard from the headset
.
Sidetone Down
Every time you press the volume down button, a beep sound will be heard from the headset. When the level
is reached out to a minimum, a voice prompt, ‘minimum’ will be heard from the headset
.
Select Mode menu
In Select Mode menu, a Mobile Station can be staying in MS mode or can be set into a Beltpack (BP) mode.
In BP mode, Mobile Station performs as a Beltpack, BP750 of the LT750 Expert system. You need to pair up
the Mobile Station in the BP mode with a BS750 Base Station for use.
Once either the BP or MS mode is selected in this menu, the mode of the Mobile Station will be switched as
set with its automatic rebooting.
Low cut menu
In Low Cut menu, the low frequency component such as the sound of wind and air conditioner can be
adjustable. To cut the low frequency at maximum, select -6dB.
Select Aux menu
In Select Aux menu, you can activate the connection of auxiliary devices. Select
‘On’ when you connect
and activate the connection.
When it is set as ‘On’, the auxiliary input gain can be adjustable with the
microphone gain control, and the auxiliary output gain can be adjustable with the speaker volume control.
On auxiliary output, all sound heard through headset will be out the same.
NOTE
: In Aux On mode, all voice prompts from headset will not be available.
NOTE:
The battery will last for lesser hours in the Aux On mode. It is recommended to use the power
adapter when you use the Mobile Station with a connection of auxiliary devices.
Figure 4-11. Select Aux
menu
Figure 4-10. Low Cut menu
MS
Figure 4-9. Select Mode menu
Figure 4-8.
Sidetone menu
Figure 4-7. Microphone gain menu
