ⓒ
2019
LaON
Technology Co., Ltd. All rights reserved.
30
Stand-alone operation in each independent area
Pairing with Master Beltpack
BP850 Beltpack in a group channel one which is already paired up with the Mobile Station will automatically be
linked to the Master Beltpack and any additional pairing setup is not required. If a Beltpack needs to be paired
up again to the Master Beltpack, follow the process below. In any case, the Beltpack should initially be paired
up with the Mobile Station.
⚫
With the Master Beltpack, confirm if the Normal menu is displayed on the screen. Press and hold the Set
button on the front panel just after pressing and holding the PWR button. By doing this, the Master Beltpack
will be in ‘pairing waiting mode’ and the message, ‘Pairing…’ will shortly appears on the Master Beltpack
display and you can release both buttons now.
⚫
Master Beltpack will be waiting for the pairing requirement from the Beltpack for 20 seconds and all
communications between Beltpack will be halted during this time.
⚫
Prepare the Beltpack to be paired up with the Master Beltpack within 3 feet (1 meter). Confirm the Normal
menu is displayed on the Beltpack. Press and hold the Set button on the front panel just after pressing and
holding the PWR button.
By doing this, the Beltpack will be in ‘pairing processing mode’ and the message, ‘Pairing…’ will shortly
appears on the Beltpack display and you can release both buttons now.
If the pairing is completed successfully
;
The message, ‘Paring…’ will be changed to ‘Paring Completed’ within 20 seconds as shown from the Figure.
And the LED adjacent to the Talk button of the Beltpack is changed to green.
If the pairing is failed;
After the message ‘Pairing...’ appears on the Beltpack display, up to 20 seconds will be taken until the
message,
‘Pairing Failed’ appears in the Beltpack display. Try to process again.
Low cut menu
In Low cut menu, the low frequency component such as the sound of wind and air conditioner can be
adjustable. To cut the low frequency at maximum, select -6dB.
Figure 4-35. Low Cut menu
Pairing …
PairingFailed
Figure 4-34. Pairing failed status
Pairing
…
Pairing Completed
Figure 4-33. Pairing completed status
……..
BP1
BP2
BP3
BP4
BP127
BP128
BP150 Beltpack
……..
BP1
BP2
BP3
BP4
BP127
BP128
BP150 Beltpack
Master Beltpack (MB)
The Beltpack is connected to the Mobile Station of Communication group 1 and allows automatic or manual
roaming between the Mobile Station and Master Beltpack.
MS150 Mobile Station
