9
OPERATION
BASIC OPERATION
SWITCHING ON/OFF THE UNIT
Press button (8) to turn on the unit.
When the unit is on, press and hold
button (6) to turn the unit off.
FACEPLATE RELEASE
Press
button (1) to detach the
removable faceplate.
SOUND ADJUSTMENT
Rotate the
SEL
button (22) to adjust the
volume. up or down step by step.
Shortly press
MUTE
button (8) will mute the
sound, press it again will resume the
sound.
LOUDNESS
Press
LOUD
button (23) for several
seconds to switch loudness function on,
and “LOUD” will appear on the LCD for
several seconds. Press it for several
seconds again to release this function.
DISPLAY
Press
DSP
button (19) to change display all
the unit setting and music information.
RESET FUNCTION
RESET
button (25) must be activated with
either a ballpoint pen or thin metal object.
The
RESET
button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press
RESET
button (25), the unit
can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
MODE SELECTION
Shortly press
MODE
button (9) to change
the unit working mode: Radio, USB, CARD,
IPOD (optional), AUX and BT Audio.
SYSTEM SETTING
Long press the
SEL
button (22) on the front
panel to enter SYSTEM SETTING mode.
There are below items to adjust.
P-VOL /ADJ/ BEEP ON_OFF/ LOC
ON_OFF
ON/
STEREO_MONO/AREA
_USA_EUR _ORT_BRZ
Use
SEL
button (22) to select the item you
want to change, and use
SEL
button (22) to
change the corresponding setting.
1) BEEP ON/OFF:
When the BEEP ON or BEEP OFF is
displayed on the LCD, rotate the
SEL
button (
22
) to switch on/off the BEEP
sound
2) P-VOL
P-VOL: The max volume value when you
turn on the unit. Such as when you set
the P-VOL to 40. If the volume value is
small than 40 when you turn off the unit.
Next time you turn on the unit. The
volume will keep the last volume value.
But if the volume value is large than 40
when you turn off the unit. Then next time
you turn on the unit. The volume value
will back to 40.
3) Radio area setting:
Four areas are insided , that are
Europe,USA, Orition,Brasil. Rotate the
SEL
button (
22
) to set the radio area you
wanted.
AUDIO ADVANCED SETTINGS
Short press the
SEL
button (22) on the
front panel to enter advanced audio
SETTING mode: BESS-TREB-BAL L-R,
FAD L-R.
Roate the
SEL
button (22), you can change
the Left and right balance and Fader.
Equalization setting
Long press
EQ
button (17) to turn on
