Chapter 4: XPress DR+W
XPress DR+ User Guide
32
LEDs
Table 4-1. XPress DR+W LED Functions
LED
Status
Meaning
Off
No data being transmitted from XPress DR+
Serial port - TXD LED (Yellow)
Blinking
Data being transmitted from XPress DR+
Off
No data being received by XPress DR+
Serial port - RXD LED (Green)
Blinking
Data being received by XPress DR+
Off
No Ethernet link established.
Ethernet port - 10/100 Link (Green)
Steady On
Ethernet link established.
Off
No data activity
Ethernet port – Activity (Yellow)
Blinking Data
activity
Steady On
Power OK
Blinking 2x
No DHCP response
Power/Diagnostic LED (Orange)
Blinking 2x
Setup Menu active
Off
Wireless off (not configured for wireless)
Off
Wireless on, searching
Blinking (very short)
Wireless on, attempting to associate
On
Wireless on, associated, power management off
Wireless LED (Yellow)
On when receiving or
transmitting, off in-between
Wireless on, associated, power management on
Required Information for Initial Configuration
Hardware Address
Take note of the unit’s hardware address (also known as MAC address). It is on
the product label, in the format: 00-20-4a-XX-XX-XX, where the XXs are unique
numbers assigned to the product.
Hardware Address
:
00-20-4a-_____-_____-_____
IP Address
The XPress DR+W must have a unique IP address on the network. The systems
administrator generally provides the IP address, subnet mask, and gateway.