Lantronix
SMxTAT2SA Install Guide
33716 Rev. L
16
Chapter 3 Installation
Package Contents
Carefully unpack the package contents. Make sure no items are missing or damaged. Please save the
packaging for possible future use.
•
The Switch
•
AC Power cord (country specific)
•
Four adhesive rubber feet
•
Printed Quick Start Guide
•
19” Rack Mount brackets
Caution
: The switch is an indoor device. If it is to be used with outdoor devices such as outdoor IP cameras or
outdoor Wi-Fi APs, then you are strongly suggested to install a surge protector or surge suppressor to protect
the switch.
Compliant with 802.3at in Environment A when using an isolated power supply. For 802.3at Environment B
applications, i.e., building to building, copper to copper endpoint connections: 1) use an Ethernet network isolator
module (PoE disabled), or 2) use mid-span injector (s), e.g., MIL-L100i, L1000i-at, between this switch’s PSE
port and link partner PD port.
Mounting the Switch on a Wall
Step 1: In
stall user-supplied screws on the appropriate location on the wall and be aware of the dimensional
limitation of the screws.
Figure 4: Install screws to the wall
Figure 5: Attaching switch to the wall
Step 2:
Make sure that the switch is attached securely to wall.