Lantronix SM16TAT2SA, Install Manual, Page: 10 / 30

Lantronix SMxTAT2SA Install Guide
33716 Rev. L https://www.lantronix.com/ 10
Traffic Monitoring Display visual chart of network traffic of all devices and monitor every port at any time.
Troubleshooting
Network diagnostic between master switch and devices. Supports protection mechanism,
such as rate-limiting to protect your devices from brute-force downloading.
Power over Ethernet (PoE)
Port Configuration Supports per port PoE configuration function
PoE Scheduling
Supports per port PoE scheduling to turn on/off the PoE powered devices (PDs).
Auto Power Reset Automatically checks the link status of PDs, and reboots PDs if there are no responses.
Power Delay
The switch provides power to the PDs based on delay time when PoE switch boots up, to
protect switch from misuse of the PDs
Always on PoE
Always On PoE (soft reboot) allows a warm reboot of the switch without affecting the
PoE output to the PD, providing continuous power even during firmware upgrade
About This Manual
This manual describes how to install, configure, and troubleshoot the SMxTAT2SA switch, including how to:
• Install the switch.
• Check switch status by reading the LED behavior.
•
Reset the switch or restore the switch to factory defaults.
•
Initially configure the switch.
•
Troubleshoot switch installation.
Related Manuals
Related manuals include:
•
SMxTAT2SA Quick Start Guide, 33715
•
SMxTAT2SA Web User Guide, 33717
• SMxxTATS2A CLI Reference, 33718
• SMxTAT2SA Unified API User Guide, 33825
•
Release Notes (version specific)
For Lantronix Drivers, Firmware, Manuals, Product Notifications, Warranty Policy & Procedures, etc. go to the
Lantronix Technical Resource Center .
Note that this manual provides links to third party web sites for which Lantronix is not responsible.