Lantronix SLB088411-01 User Manual Download Page 55

Page: 55 / 280

6: Basic Parameters

SLB™ Branch Office Manager User Guide

To add an IP filter:

1. On the IP Filter page, click the

Add Ruleset

button. The following page displays:

2. Enter the following

Ruleset Name

Name that identifies a filter; may be composed of letters,
numbers, and hyphens only. (The name cannot start with a
hyphen.)

Example:

FILTER-2

Rule Parameters

IP Address

Specify a single IP address to act as a filter.
Example: 172.19.220.64 – this specific IP address only

Subnet Mask

Specify a subnet mask to act as a filter.
Example: 255.255.0.0

Protocol

From the drop-down list, select the type of protocol through
which the filter will operate. The default setting is All.

Summary of Contents for SLB088411-01

























































































































































































































































































Search results

Summary of Contents for SLB088411-01

Reviews:

Lantronix SLB088411-01, User Manual, Page: 55 / 280

Search results

Summary of Contents for SLB088411-01

Reviews: