Lantronix SLB088411-01 User Manual Download Page 192

Page: 192 / 280

12: Maintenance and Operation

SLB™ Branch Office Manager User Guide

192

4. To email the system log to an individual:

a) In the

Comment

field, enter a comment (if desired).

b) Select

and enter the person’s email address.

c) Press the

Email Output

button.

5. To email the system log to Lantronix Technical Support:

a) In the

Comment

field, enter a comment (if desired).

b) Select

to: Lantronix Tech Support.

c) Call Lantronix Tech Support and obtain a case number.

Note:

For contact information, click the Lantronix Tech Support link.

d) Enter the number in

Case Number

e) Press the

Email Output

button.

6. A message asks for confirmation. Click

To clear system logs:

1. From the main menu, select

SLB Maintenance – System Logs

2. Select the logs you want to clear and click the

Clear Log

button.

Summary of Contents for SLB088411-01

























































































































































































































































































Search results

Summary of Contents for SLB088411-01

Reviews:

Lantronix SLB088411-01, User Manual, Page: 192 / 280

Search results

Summary of Contents for SLB088411-01

Reviews: