4: Quick Setup
SLB™ Branch Office Manager User Guide
32
Note:
If you have connected Eth1 to the network, and Eth1 is able to acquire
an IP address through DHCP, this IP address displays, followed by the letter
[D]. Otherwise, the IP address displays as all zeros (000.000.000.000).
2. Press the
Enter
button on the keypad to enter edit mode. A cursor displays below
one character of the existing IP address setting.
3. To enter values:
Use the
left
or
right arrow
to move the cursor to the left or to the right position.
Use the
up
or
down arrow
to increment or decrement the numerical value.
4. When you have the IP address as you want it, press
Enter
to exit edit mode, and
then press the
down arrow
button. The Subnet Mask parameter displays.
Note:
You must edit the IP address and the Subnet Mask together for a valid
IP address combination.
5. To save your entries for one or more parameters in the group, press the
right
arrow
button. The
Save Settings? Yes/No
prompt displays.
Note:
If the prompt does not display, make sure you are no longer in edit
mode.
6. Use the
left/right arrow
buttons to select
Yes
, and press the
Enter
button.
7. Press the
right arrow
button to move to the next option,
Console Settings
.
8. Repeat steps 2-7 for each setting.
9. Press the
right arrow
button to move to the next option,
Date/Time Settings
, and
click
Enter
to edit the time zone.
a) To enter a US time zone, use the
up/down arrow
buttons to scroll through the
US time zones, and then press
Enter
to select the correct one.
b) To enter a time zone outside the US, press the
left arrow
button to move up to
the top level of time zones.
Press the up/down arrow button to scroll
through the top level.
A time zone with a trailing slash (such as Africa/) has sub-time zones. Use the
right arrow
button to select the Africa time zones, and then the
up/down
arrows
to scroll through them.
Press
Enter
to select the correct time zone. To move back to the top-level time
zone at any time, press the
left arrow
.
10. To save your entries, press the
right arrow
button. The
Save Settings? Yes/No
prompt displays.
Note:
If the prompt does not display, make sure you are no longer in edit
mode.
11. Use the
left/right arrow
buttons to select
Yes
, and press the
Enter
button.
12. To review the saved settings, press the
up
or
down
arrows
to step through the
current settings.
When you are done, the front panel returns to the clock display. The network port
resets to the new settings, and you can connect to your IP network for further
administration. You should be able to Telnet or SSH to the SLB branch office
manager through your network connection, or access the web interface through a
web browser.