Lantronix SLB088411-01, User Manual, Page: 249 / 280

14: Command Reference
SLB™ Branch Office Manager User Guide 249
sysloglogging <enable| disable >
Description
Configures logging settings for one or more device ports.
Local logging must be enabled for a device port for the
locallog
commands to be executed. To
use the
set locallog clear
command, the user must have permission to clear port buffers
(see 11: User Authentication ).
Example
set deviceport port 2-5,6,12,15-16 baud 2400 locallogging enable
show locallog
Syntax
show locallog <Device Port # or Name> [bytes <Bytes To Display>]
Description
Displays a specific number of bytes of data for a device port. 1 K is the default.
set locallog clear
Syntax
set locallog clear <Device Port # or Name>
Description
Clears the local log for a device port.
The
locallog
commands can only be executed for a device port if local logging is enabled for
the port. The
set locallog clear
command can only be executed if the user has permission
to clear port buffers (see 11: User Authentication ).
Network Commands
set network
Syntax
set network <parameters>
Parameters
interval <1-99999 Seconds>
ipforwarding <enable| disable >
probes <Number of Probes>
startprobes <1-99999 Seconds>
Description
Sets TCP Keepalive and IP Forwarding network parameters.