Lantronix SESPM1040-541-LT Series, Install Manual, Page: 57 / 64

Lantronix SESPM1040-541-LT-xx Install Guide
33772 Rev. F https://www.lantronix.com/ Page
57
of
64
Compliance Information
Declaration of Conformity
Manufacture’s Name : Lantronix, Inc.
Manufacture’s Address : 48 Discovery, Suite 250, Irvine, CA 92618 U.S.A.
Declares that the Power++ Solutions family of products:
SESPM1040-541-LT-AC, SESPM1040-541-LT-DC, SESPM1040-541-LT-PD
Conforms to the following Product Regulations:
EN 55022:2010; CISPR 22:2008
FCC Part 15, Subpart B, Class A
EN 55024: 2010
EN 61000-4-2: 2009. EN 61000-4-3: 2006 + A1: 2008 + A2: 2010
EN 61000-4-4: 2004 + AC: 2006 + A1: 2010. EN 61000-4-5: 2006, EN 61000-4-6: 2009
EN 61000-4-8: 2010, EN 61000-4-11: 2004
UL 62368-1, 2nd Ed, 2014-12-01 (Audio/video, information and communication technology equipment Part 1:
Safety requirements)
CSA C22.2 No. 62368-1-14, 2nd Ed., Issue Date: 2014-12-01 (Audio/video, information and communication
technology equipment Part 1: Safety requirements)
With the technical construction on file at the above address, this product carries the CE Mark.
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directives and
Standards.
Place: Irvine, California
Date: June 5, 2023
Signature:
Eric Bass
Full Name: Eric Bass
Position: Vice President of Engineering
FCC Regulations
NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at their
own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This device complies with Part 18 of the FCC Rules. This Industrial, scientific, and medical (ISM) equipment.
Equipment or appliances designed to generate and use locally RF energy for industrial, scientific, medical,
domestic or similar purposes, excluding applications in the field of telecommunication.
ISM equipment shall be designed and constructed in accordance with good engineering practice with sufficient
shielding and filtering to provide adequate suppression of emissions on frequencies outside the frequency bands
specified in §18.301. (b) Subject to the exceptions in paragraphs (c) and (d) of this section and irrespective of