Lantronix
SESPM1040-541-LT-xx Install Guide
33772 Rev. F
Page
33
of
64
SFP Installation
Each of the SESPM1040-541-LT-xx versions has one combo
10/100/1000Base-T
RJ-45 or 100/1000Base-X SFP port. You can install or remove a mini-GBIC SFP
module from a SFP port without having to power off the switch.
The SFP cages are oriented with the bottom SFP cage used for the included
combo port and the top SFP cage used for the optional second combo port.
1.
On the bottom SFP cage insert the SFP with the label down.
2.
On the top SFP cage insert the SFP with the label up.
Note
: The SFP ports must use industrial-rated optical transceiver product, Rated 3.3Vdc, Laser Class 1. See the
SFP manual for specific Cautions, Warnings, and instructions.
Industrial SFP Modules
: Lantronix offers a full line of small form factor pluggable (SFP) modules. Industrial rated
models must be used for outdoor switch installation. See Lantronix
for more SFP
information.
SFP Orientation
The FOA (Fiber Optic Association) is an international non-profit educational organization chartered to promote
professionalism in fiber optics through education, certification and standards. See the FOA
Optic System Design and Installation
for fiber optics/fiber cabling issues. The FOA's
includes almost a thousand pages of materials created by the FOA covering the basics to
advanced topics on fiber optics and premises cabling.
To install an SFP
in the SESPM1040-541-LT-xx:
1.
Position the SFP device at the proper installation slot, with the label facing correctly (see SFP Orientation
above).
2.
Carefully slide the SFP device into the slot, aligning it with the internal installation guides.
3.
Ensure that the SFP device is firmly seated against the internal mating connector.
4.
Connect the fiber cable to the fiber port connector of the SFP device.