Lantronix SESPM1040-541-LT Series, Install Manual, Page: 11 / 64

Lantronix SESPM1040-541-LT-xx Install Guide
33772 Rev. F https://www.lantronix.com/ Page
11
of
64
Feature Benefit
RADIUS
Provides RADIUS Client enable/disable and configuration of 1-4 Radius Servers
for authentication purposes.
Provides Client enable/disable and configuration of 1-4
Servers for authentication purposes.
SSH v2 Server
Secure Shell (SSH) cryptographic network protocol allows setup of Host and
User Public-Key Settings via RSA public-key encryption technology or DSA
using FIPS (Federal Information Processing Standard) for digital signatures.
Configuration Backup and
Restore
Backup and Restore running-config, startup-config, or default-config via TFTP
or SCP (future). For example, save the startup-config file to ensure that the
currently active configuration will be used at the next reboot.
Tamper Detection
The switch includes a 3-axis linear accelerometer that detects if the switch has
exceeded user-selected vibration limits, indicating someone is tampering with
the switch or the switch mount has somehow been compromised.
Cable Diagnostics /
Virtual Cable Test (VCT)
The Cable Diagnostics uses TDR (Time Domain Reflectometry) for remote
identification of potential cable malfunctions. The Cable Diagnostics detect
and report potential cabling issues such as pair swaps, pair polarity, and
excessive skew. It can also detect cable opens, shorts, or impedance mismatch
in the cable and report accurately within one meter the distance to the fault.
MAC Address Table
Switching of frames is based on the DMAC address contained in the frame.
The switch builds a table that maps MAC addresses to switch ports for
knowing which ports the frames should go to (based on the DMAC address in
the frame). Provides both static and dynamic entries. The static entries are
configured by the network administrator to do a fixed mapping between the
DMAC address and switch ports.
Port VLAN
Create a VLAN and associate a VLAN ID with it. Assign a Switch Port to a VLAN
(create an association between a port on the SESPM switch and a previously
created VLAN). Define the Switch Port usage type (trunk or access) and set
Allowed VLANs.
DMI (Diagnostic Monitoring
Information)
View DMI (Diagnostic Monitoring Information) including SFP Temperature,
Voltage, Bias, TX and RX power, and Vendor info (part number, serial number,
revision, date code).
DHCP Server
This module lets you view and configure up to 5 DHCP server instances.
A DHCP Server can automatically provide and assign IP addresses, default
gateways and other network parameters to client devices. You can add,
modify and delete DHCP Server pool entries on a table to configure Start IP,
End IP, Lease Time, Subnet Mask, Default Router, and DNS Server. The page
also lets you add a new interface where the VLAN field is configurable.