PremierWave® 2050 Through-Hole Adapter Integration Guide
4
Integration Notes
This module is authorized under limited module approval specific to mobile host equipment.
The antenna must be installed with a 20 cm space maintained between the antenna and users.
The transmitter module may not be co-located with any other transmitter or antenna.
As long as the two conditions above are met, further transmitter testing will not be required.
However, the OEM integrator is still responsible for testing their end product for any additional
compliance requirements required with this module installed (for example, digital device
emission, PC peripheral requirements, etc.)
In the event that these conditions cannot be met (for example certain laptop configurations,
general purpose PCMCIA or similar cards, or co-location with another transmitter)
and
obtaining a separate FCC authorization will be required, then the FCC authorization is no
longer considered valid and the FCC ID cannot be used on the final product (including the
transmitter).
Changes or modifications to this device not explicitly approved by Lantronix will void the user's
authority to operate this device and will void all warranties.
Note:
With the purchase of any PremierWave 2050 family product, the OEM agrees to an
OEM firmware license agreement that grants the OEM a non-exclusive, royalty-free
firmware license to use and distribute the binary firmware image provided, only to the
extent necessary to use the PremierWave 2050 hardware. For further details, please see
the PremierWave 2050 OEM firmware license agreement.
Note:
Please refer to the PremierWave 2050 802.11ac Embedded Wi-Fi Gateway
www.lantronix.com/support/documentation
, for the full compliance
specification and requirements.
Warranty
For details on the Lantronix warranty policy, please go to our Web site at
www.lantronix.com/support/warranty
Revision History
Date
Rev.
Comments
August 2017
A
Initial document.
For the latest revision of this product document, please check our online documentation at