background image

    

PremierWave® 2050 Through-Hole Adapter Integration Guide 

Intellectual Property 

© 2017 Lantronix, Inc.  All rights reserved. No part of the contents of this publication may be 

transmitted or reproduced in any form or by any means without the written permission of 

Lantronix.  

Lantronix

 and 

PremierWave

 are registered trademarks of Lantronix, Inc. in the United States 

and other countries.   
Patented: 

http://patents.lantronix.com

additional patents pending. 

Wi-Fi

 is a registered trademark of Wi-Fi Alliance Corporation.  All other trademarks and trade 

names are the property of their respective holders.  

Contacts 

Lantronix, Inc. 

7535 Irvine Center Drive, Suite 100 

Irvine, CA 92618, USA 

Toll Free:  800-526-8766 

Phone:   949-453-3990 

Fax:  

949-453-3995 

Technical Support

 

Online:   

www.lantronix.com/support

 

Sales Offices

 

For a current list of our domestic and international sales offices, go to the Lantronix web site at 

www.lantronix.com/about/contact

 

Disclaimer 

All information contained herein is provided “AS IS.”  Lantronix undertakes no obligation to 

update the information in this publication.  Lantronix does not make, and specifically disclaims, 

all warranties of any kind (express, implied or otherwise) regarding title, non-infringement, 

fitness, quality, accuracy, completeness, usefulness, suitability or performance of the 

information provided herein. Lantronix shall have no liability whatsoever to any user for any 

damages, losses and causes of action (whether in contract or in tort or otherwise) in 

connection with the user’s access or usage of any of the information or content contained 

herein.  The information and specifications contained in this document are subject to change 

without notice. 
This equipment has to be tested and found to comply with the limits for a Class B digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential installation. This equipment generates, 

uses, and can radiate radio frequency energy and, if not installed and used in accordance with 

the instructions, may cause harmful interference to radio communications. However, there is 

no guarantee that interference will not occur in a particular installation.  
 
 
 

Summary of Contents for PremierWave 2050































Reviews: