Lantronix M/GE-ISW 01 Series, User Manual, Page: 7 / 22

Lantronix
M/GE-ISW-xx-01 User Guide
33627 Rev. D http://www.lantronix.com/ Page 7 of 8
Installing DIN Rail Clip
A DIN Rail Clip and a 4-40 Screw are included.
To install the DIN Rail onto the media converter:
1. Position the DIN Rail Clip to the side of the media converter as shown below.
2. Position the 4-40 screw to attach the DIN rail to the media converter as shown above right.
3. Insert and tighten the 4-40 Screw until the DIN Rail Clip appears as shown above. When the DIN Rail
Clip is attached, there should be a “gap” between the Clip and the Media Converter as shown above.