Lantronix HDK845 User Manual Download Page 43

Page: 43 / 44

6: Display Card

Snapdragon 845 HDK Hardware Development Kit User Guide

B2B

QCT800H

B2B

5.7" FHD TFT

1x4lanes

SPI

Carrier Board

Display Card

Processor Board (10L AnyLayer)

Figure 6-2 Display Card Default Configuration

Table 6-2 Display Power Domains

Display Signal

Power Domain

PM845 VREG_S4A_1P8 (1.8V)

up to 300 mA

PM845 VREG_L28A_3P0 (3.0V)

up to 150 mA

PM845 VREG_L14A_1P8 (1.8V)

up to 300 mA

PM845 VREG_L6A_1P85 (1.8V)

up to 50 mA

Carrier 3.3V

up to 0.5A

Carrier 5 V

up to 1.5A

Carrier 12 V

up to 0.5A

HDK845 display card (part number: 20-PB892-H10) is an additional PCBA that mates with the display

connector J1301 on the carrier board. This board allows users to interface with the development kit

via the LCD (see below for details) that comes preinstalled on the display card. Figure 6-2 Display

Card Default Configuration, illustrates the interfacing connectors on the display card.
The display card comes as an additional add-on to the HDK845 development kit.

Connecting the Display Card to the Development Kit

This configuration allows the user to use the preinstalled LCD display that comes with the display

board. As shown in the block diagram below, the MIPI DSI0 lines, which come from the 100-pin ERM8

connector, directly connects to the QHD TFT panel. See the section below for more details on this LCD

panel. It is important to note that connector J0501 of the display card needs to connect to J1301 of the

carrier board for this configuration to work.

Summary of Contents for HDK845













































Search results

Summary of Contents for HDK845

Reviews:

Related manuals for HDK845

Brands by name

Popular brands

Lantronix HDK845, User Manual

Search results

Summary of Contents for HDK845

Reviews:

Related manuals for HDK845

Brands by name

Popular brands